Not sure which machine you need? Our application engineers help you choose — free of charge. Get a Free Site Assessment →
Equipment Guide

The 7-Step Wear Parts Ordering Checklist (From a Buyer Who Isn't a Mechanic)

Posted on Friday 13th of November 2026 by Claire Dubois

I'm the office administrator for a 140-person contracting company. I started managing equipment and maintenance purchasing in 2020. These days that's roughly 60 to 80 orders a year across 8 vendors, and it lands on my desk alongside everything else I'm coordinating.

I am not a mechanic. I've never changed a bucket tooth. But I'm the one who sends the purchase order, and when the wrong part shows up, I'm the one who has to explain it to operations and to finance.

Here's the checklist I run before any wear parts order goes out. Seven steps. It takes about ten minutes now, and it has saved me considerably more than ten minutes on several occasions.

Who this is for

You'll get use out of this if you order ESCO excavator teeth, adapters, cutting edges, or breaker chisels for a crew you don't personally operate. If you're the shop foreman, you probably already know this and can skip ahead. If you're the person on the other end of a text message that says the bucket needs teeth and nothing else — this is for you.

Step 1: Get the machine ID, not the machine's nickname

Site leads name machines. The 320. The old one. Dave's machine. None of that is orderable.

What I need is: make, model, year, and — ideally — the serial number off the plate. Why so specific? Because the same model designation can carry different buckets and different adapter setups across production years, and because a machine that's been rebuilt may not match its original spec at all.

My ask: a photo of the machine plate, plus one photo of the bucket with a tape measure held against it. Two photos, thirty seconds, saves a week. Checkpoint — if I don't have a photo, I don't place the order. No exceptions, including when they tell me it's urgent.

Step 2: Confirm what the part actually does

This sounds obvious and it isn't. If you've ever typed what is a backhoe into a search bar at nine at night because a site lead texted you the backhoe needs teeth, you know exactly what I mean.

A backhoe loader — the tractor-style machine with a digging arm on the back — is not the same animal as a track excavator. Different size class, different bucket, different tooth SKUs. Order for the wrong one and you've bought a set of teeth that fit nothing on your yard. The same goes for wheel loader buckets versus excavator buckets. Three machine types, three separate parts universes.

So I ask one question: which machine, and what is it digging into? Rock, clay, and demolition debris all push toward different tooth profiles. The answer changes what I order, and the person holding the phone usually knows it in one sentence.

Step 3: Identify the system before you identify the tooth

Teeth don't bolt onto buckets. They mount to adapters, and adapters follow a system. ESCO's construction range includes their Ultralok system, which is built around a hammerless, pinless attachment — the manufacturer's own product documentation describes it as fitting without pins or a hammer. Other buckets on the same yard may run a conventional pin-and-retainer setup.

The two don't interchange. If you order Ultralok teeth for a pin-on adapter, you'll find out at receiving. Trust me on the timing here.

Checkpoint: one close-up photo of the tooth-to-adapter joint. I can see in two seconds whether there's a pin or not. I stopped trusting my memory on this after about the third time it failed me.

Step 4: Check the adapter, not just the tooth

This is the step most people skip. Teeth are the consumable — everyone knows to replace them. Adapters wear too, just more slowly, and they're the part that actually holds everything on.

Here's the failure I walked into. I knew I should've asked them to measure the adapter nose before ordering. I thought, what are the odds on a machine that's only a few years old? The odds were fine. Right up until the new teeth went on and two of them sat loose and rocked by hand. The crew couldn't run the bucket in rock with teeth that might come off, so the machine sat for a day and a half, and I paid the return shipping out of my own budget line to avoid a conversation with the VP.

Ask for a wear measurement on the adapter nose, or at minimum a photo of the side profile. If the nose is past its limit, the new teeth will be loose from day one.

And yes — this is also a client-perception thing. The machine shows up on site before anyone from your company says a word. Fresh teeth and a clean cutting edge read as a fleet somebody is paying attention to. Worn-out, chipped, missing teeth read the opposite. That's not an argument for buying the most expensive option on the page; it's an argument for not running adapters past their wear limit to save a line item.

People assume premium wear parts cost more because they're premium. I think the causation runs the other way: parts that survive abrasive rock and keep a crew running can hold their price, because contractors keep coming back for them. The price follows the performance, not the other way around.

Step 5: Get the lead time as a date, not as a phrase

I said as soon as possible. The vendor heard whenever it's convenient. Two weeks later I'm on the phone asking where the shipment is, and nobody's wrong, exactly, but the machine is still parked.

Now I ask for a ship date and a delivery date in writing. Not a range. A date. Plus a name for who calls me if it slips. If a vendor won't put a date in an email, that tells me something useful about how the order will go.

Step 6: Confirm the invoicing before the PO goes out

This is the admin-specific step and it's the one that has cost me the most money. In 2021 I found a genuinely good price on a wear parts lot from a new supplier — meaningfully cheaper than our regular source. I ordered. They sent a handwritten receipt. Finance rejected the expense report outright, and I ate the cost out of the department budget.

So now, before any new vendor gets a PO, I confirm four things: they can bill against a PO number, they provide an itemized invoice, the currency and freight terms are stated, and the payment terms match what we actually agreed to. Boring. Cheap insurance.

Step 7: Inspect at receiving with a caliper, not your eyes

Eyeballing a tooth tells you almost nothing. The difference between the correct part and a near-miss is a few millimeters, and it looks fine until it doesn't fit.

What I do now: measure the mounting dimension against the old part, weigh one piece and compare it to the spec, and check the part number against the packing slip before anything goes to the yard. Then I log the install date. After a few cycles you have a real replacement interval instead of a guess, and next year's ordering takes half the time.

What doesn't belong on this purchase order

Two categories keep getting attached to wear parts orders, and both cause problems downstream.

Shop equipment. A Milwaukee air compressor for the maintenance bay is a capital-ish purchase with a different approval path, a different budget line, and often a different vendor. Put it on the same PO as bucket teeth and finance will bounce the whole thing — not because either item is wrong, but because the coding doesn't match.

Parts for small or older yard equipment. If you're running an old yard tractor — the kind of machine people end up searching for under names like Crewe tractor — its bucket or attachment teeth are a different SKU entirely from anything on a 20-ton excavator. Same word, different part. Separate order, separate spec sheet.

Common mistakes I've made so far

  • Ordering on a verbal spec. If it isn't in an email or a photo, it isn't confirmed.
  • Skipping the adapter check because the machine is new. New machines wear too. Step 4 exists because of this.
  • Buying teeth without checking adapter stock. If the adapters are also due, your teeth arrive and the machine still sits.
  • Treating urgency as a reason to skip steps. Every expensive mistake I've made happened on an order I was rushing.

Ten minutes of photos and measurements, four written confirmations, one caliper at receiving. That's the whole system. It's not clever, but it's kept me out of the VP's office for a while now.

Share: LinkedIn WhatsApp
Author
Claire Dubois
Claire Dubois is a drilling, foundation, and compressed-air equipment analyst covering drill rigs, piling machines, rock drills, grouting units, and portable air compressors. She uses ISO 11886 commercial specifications for civil and geotechnical drilling and foundation machines, plus ISO 1217 acceptance tests for displacement-compressor flow and power, while examining torque, crowd force, pullback, airflow, pressure, and specific energy. Her guides help engineers match ground conditions, bore method, tool demand, dust control, setup clearance, compressor duty, and transport configuration.

Leave a Reply

Your email will not be published. Required fields marked *